Electro-hydraulically power operated, our Blocking Bollards come in single or multiple units with a common drive unit. The standard blocking height above surface level ranges between 500 mm to 850 mm. Aesthetically designed in different shapes and colors, this range of bollards is ideal for pedestrian zones in the city, fuel pumps as well as for security purposes in front of important buildings
Madoors systems retractable security bollard is an automatic product that provides exceptional flexibility in appearance and functionality. This automatic bollard is designed for access control for building entrances such as hotels, event centers, golf clubs, exhibition centers and town centers.
MADOORS hydraulic rising bollards are designed for high security vehicle entrances, army, industrial, governmental and commercial buildings or streets which are closed to vehicle traffic between certain hours of the day. Both "High Security" and "Commercial" type MADOORS Hydraulic Rising Bollards have the same strength, whereas "Commercial" bollards are shorter than the "High Security" ones. The thickness of the bollard, the underground construction, the self-lubricating sealing and guide ring made of special plastic types, hydraulic piston, flange thicknesses and diameters, hydraulic connections, installation and drainage procedures etc. are all the same. These units are designed to K12 standards. Finite element analysis can be supplied upon request. Typical raise/lower time is 3 seconds but it is possible to design the system to raise/lower in 1.5 seconds.
New model aluminium strong body automatic bollards
Madoors Automatic bollards systems 3 years warranty Select the level of security that is required for your application. All madoors vehicle access control equipment meets or exceeds Turkey Department of State and Department of Defense certifications. You have the assurance that the equipment you are employing for physical vehicle security has been tested to the highest standards for repelling terrorist attacks. Such strength is important whether you’re planning to secure a military base, warehouse or parked freight trailer.
Bollards are aesthetically pleasing and allow pedestrians to move between bollards in non-roadway applications. They are available with a variety of decorative covers and the architect my design their own cast covers to reflect architectural details of the facility. You can specify cast sleeves of aluminum, or fiberglass, or brushed stainless steel which slip right over the crash tube. Bollards may be fitted with an internal warning light for increased visibility and engineered to suit high traffic volumes. madoors also offers rolled bronze plaque which can be mounted on the bollard body displaying the organizations, logo.
Madoors's bollard systems operate individually or in groups of up to ten and are used for intermediate level security applications. Individual bollards are up to 13.25 inches (336 mm) in diameter, up to 39.3 inches high (1000 mm) and are usually mounted on 3-foot centers. Hydraulic and pneumatic, electromechanical, manual versions can be operated by a variety of control systems. Fixed post versions are available to secure the sides of roadways with the same crash rating and appearance. Manual versions are counter balanced and lock in the up or down position. All models are crash rated and may be lowered to allow passage of authorized vehicles. Electro mechanical automatic bollards ;
Our new range of Electro-Mechanical come with a variety of options and are available at unbeatable prices.
We can offer fast delivery on these items as they are normally available ex-stock for a next working day delivery. Madoors Ltd can also offer a full installation service for these products.
Voltage 230 V +/- 10% 50-60Hz Power & Speed 0.13 kW, (0.18HP); 2,800RPM Duty Cycle 500 Cycles Per Day Working Temperature -20°C to +60°C Mechanics Reversable; rolled worm screw Operation Time Approx. 7 Seconds including slowing down Emergency Release Lowers automatically with power cut off Maximum Thrust Force 1000 N max. during rod raising phase Size (Buried Casing) 250mm X 300mm X 965mm Size (Bollard) 115mm Diameter X 490mm High Finish Cataphoresis + Coated Grey RAL 7022 Bollard Material G20 Cast Iron Casing Lights NO Protection Level IP67 Cable Length 10m Weight 60Kg Reflective Film 50mm Yellow Reflexite DYNAMIC LOAD (impact Height 300mm) Crash Resistance 6,000 J Break in Resistance 10,000 J AXIAL LOAD Raised Bollard Max 2,500 N Lowered Bollard Max 120,000 N
Fail 'Safe' or Fail 'Secure' Siren Detector for Automatic Lowering for Emenrgency Services Anti-Tamper Alarm Road Loops and Photo Cells Traffic Lights Numerous Access Control Systems including Push Buttons, Radion Receivers, Keypads, Card Readers, Intercoms & Transponders.
MAdoors Heavy Duty Electro Mechanical Bollard in Stainless Steel - 210 - 300 mm Diameter/700mm Above ground. Comes complete with flashing lights around rim and on top.
Power Absorbed 400W Power & Speed 0.18 kW, (0.25HP); 2,800RPM Duty Cycle 1,500 Cycles Per Day / 60 Cycles per Hour Working Temperature -15°C to +60°C Mechanics Reversable; rolled worm screw Operation Time Approx. 7 Seconds including slowing down Emergency Release Lowers automatically with power cut off Maximum Thrust Force 1000 N max. during rod raising phase Size (Buried Casing) 273mm Diameter X 915mm Size (Bollard) 210mm Diameter X 700mm High Finish Stainless Steel Bollard Material Stainless Steel Lights 4 No. On Top High Intensity L.E.D.s & 8 No. Radial L.E.D.s Protection Level IP67 Cable Length 10m Weight 100Kg Reflective Film 50mm Silver Reflexite DYNAMIC LOAD (impact Height 300mm) Crash Resistance 8,000 J Break in Resistance 400,000 J AXIAL LOAD Raised Bollard Max 5,000 N Lowered Bollard Max 150,000 N
500mm or 700mm High Stainless Steel or Powder Coated Finish With or Without Lights Fail 'Safe' or Fail 'Secure' Siren Detector for Automatic Lowering for Emenrgency Services Anti-Tamper Alarm Road Loops and Photo Cells Traffic Lights Numerous Access Control Systems including Push Buttons, Radion Receivers, Keypads, Card Readers, Intercoms & Transponders
Hydroulic automatic bollard barrier ( High security systems k7- k8 - k12 )
The madoors standard hydoulic automatic bollard represents a new generation access control solution. Many design innovations make it easy to handle and install but best of all its performance is market leading and lifetime costs exceptionally competitive. Activated by any access control system or signalling device, it is an alternative solution to fixed posts and barriers, allowing regulation of traffic into certain zones with high vehicle flow, (e.g. restricted areas, pedestrian areas, parking and industrial sites and many more). Available with a diameter of 275 mm - 400 mm, and a height of 600mm or 800mm.
The madoors automatic concealed traffic bollard has fully integrated hydraulic technology for heavy duty usage. With a standard descent time of 2.8 seconds, there is an extra setting that activates the emergency release valve and allows a decent time of just 1 second.
Fixed Bollard Option:
Cylinder height: 500mm/600mm/800mm
Cylinder diameter: 170mm-220mm-275mm-400mm
Cylinder material: Steel Fe 360
Manual lift bollards
Manual lift bollards are our entry-level and most economical retractable bollard product. When retracted, the bollard is covered by a locking lid with a tamper-resistant key for extra security. Optionally, we also offer an external padlocking model. Deploying the bollard is as easy as unlocking and opening the lid and lifting the bollard by the top handle. The bollard lifts easily from its recess in the ground and locks into place.